What if it happened if you didn’t have the edge guard that would have been bad.
we’re gonna be taking a look at a door guard edge trim for your vehicle so so you’re the actual product itself is pretty simple that means Paul it is actually just putting this on the door and this is all obviously plug-and-play.
It’s actually really pliable and bendable so he can get on those curves. We are liking how you know stretchy and privateness, however.
It’s still really tough. We like it, if this is on your door your edges are definitely protected from any
dings or scrapes and stuff like that okay so it seems like it’s one continuous long piece.
Let’s actually install this Car Door Rubber Protector okay.
How to install Car Door Rubber Protector:
1st step: Clean the door edge of your car to remove any oil, wax, and dust. Make sure the door is dry before continuing.
2nd step: Uncover the tape from the tip of the lining (Ensure the tape is installed INSIDE the door) and peel the red strip off the tape by approximately 2 inches.
3rd step: Start from the top, insert the lining onto your door edge until the lining is fully seated.
4th step: Press the lining with your thumb along the door edge until it is fully seated, then pull the red strip off.
5th step: Repeat step 4 until all edges are protected.
6th step: Use scissors to cut away unused lining for other door edges.
7th step: Let the lining dry up by itself and do not get wet for at least 12 hours. Compatible With Hyundai Accent.